Bush WC81710-11 L-Shaped Desk w/ Hutch

Bush Furniture Warranty

Limited Lifetime Warranty

Bush Industries promises to repair or replace any Bush brand product or component that is defective in material or workmanship for as long as you, the original purchaserit. This warranty is subject to the limitations, exclusions, and other provisions below. It applies to products manufactured after January 1, 2007.

Limitations involving materials and components:
The materials and components listed below are covered according to the following schedule from the date of sale:

• Five Years - Glides, casters, polymer-based components, panel, upholstery fabrics, foam, laminates,, veneer finishes, and other covering materials

Exclusions:
This warranty does not apply to and no other warranty appllies to:

• Normal wear and tear, which are to be expected over the course of ownership.
• Damage caused by the carrier-in-transit, which will be handled under separate terms.
• Modifications or attachments to the product that arre not approved by Bush Industries
• Products that were not installed, used, or maintained in accordance with product installations and warnings.
• Products used for rental purposes.
• Products used outdoors.

TO THE EXTENT PERMITTED BY LAW, BUSH INDUSTRIES MAKES NO OTHER WARRANTY, EITHER EXPRESS, STATUTORY OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNES FOR A PARTICULAR PURPOSE. IF BUSH INDUSTRIES CANNOT LAWFULLY DISCALIM ANY STATUTORY OR IMPLIED WARRANTIES THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THE WARRANTY SPECIFIED FOR THE COVERED PRODUCT OR COMPONENT. BUSH INDUSTRIES WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES.

Notice to purchases for home or personal use: Federal law does not permit the exclusion of certain implied warranties for consumer products. Therefore, if you are purchasing this product for home or personal use, the exclusion of implied warranties noted in the above paragraph does not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty applies only to product ssold within the UNited States of America and the Commonwealth of Canada.

To obtain service under this warranty:
Your Bush dealer is our mutual partner in supporting your warranty requests. By following the procedures outlined below, you can be assured of the best level of service.
1. Contact Bush Industries, Inc. within 30 days of discovery of the defect. Be prepared to affirm you are the original purchaser of the product and to provide the item number(s) from the product in question.
2. Bush Industries affirms that the product in question is eligible under the conditions of warrant stated above, the customer service representative or another representative of the Company will determine whether to provide replacement parts, authorize repairs, or replace the product.

10 YEAR COMMERCIAL WARRANTY

All products marketed under the Bush Business Furniture brand are warranted to the original purchaser at the time of purchase and for a period of ten years thereafter.

We warrant to you, the original purchaser, that our commercial quality furniture and all its parts and components are free of defects in material or workmanship. “Defects,” as used in this warranty, is defined as any imperfection which impairs the use of the furniture product.

Our warranty is expressly limited to the replacement of furniture parts and components. For ten years after the date of purchase, Bush Business Furniture will replace any parts that are defective in material or workmanship.

This warranty applies under conditions of normal use. Our Bush Business Furniture products are not intended for outdoor use. This warranty does not cover: 1) defects caused by improper assembly or disassembly; 2) defects occurring after purchase due to product modification; intentional damage, accident, misuse, abuse, negligence or exposure to the elements; and 3) labor or assembly costs.

IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, SHALL NOT EXTEND BEYOND THE DURATION OF THE WRITTEN WARRANTY STATED ABOVE, AND IN NO EVENT SHALL BUSH INDUSTRIES BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM USE OF THE PRODUCT. Some states do not allow a limitation on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you.

This warranty gives you specific legal rights. You may also have other rights that may vary from state to state.

Bush Industries Environmental Information

In support of its long-time commitment to the environment, Bush Industries-a leading global manufacturer of ready-to-assemble (RTA) and OfficeReady™ furniture for home and office-has expanded its “green” manufacturing and operational initiatives.

“At Bush, we’re environmentally conscious from the beginning to the end of our manufacturing process,” said CEO Jim Sherbert. “Most Bush products start with recycled or recovered wood fiber; and after the furniture is manufactured, we reuse or recycle many of our factory byproducts.”

Bush Industries’ wood chips and sawdust byproducts are recycled or reused for everything from boiler fuel to cow bedding on local farms. Scraps such as paper, plastic, cardboard, light metal, and heavy steel also are recycled or reused. Similarly, Bush operational processes help to minimize materials sent to landfills through the recycling of equipment and office supplies such as computers, monitors, printers, fax machines, copiers, light bulbs and batteries. And, when Bush takes one of its manufacturing machines out of service, it is stripped down for parts’ reuse and recycling. The company even makes its own pallets from factory scrap.

In addition to recycling, Bush has launched a variety of initiatives to cut energy use, including: equipment efficiency upgrades, closely-regulated 24-hour temperature controls, and weekly energy audits that identify and correct potential energy waste from equipment pipe air leaks, power to equipment not in use, and afterhours’ lighting.

The company’s commitment to the environment doesn’t stop there-sustainability is critical to the Bush Industries’ design process as well. Products are designed to minimize waste creation, and a Bush manufacturing team has been charged with developing waste-reduction and energy-efficiency solutions. Team innovations led Bush to switch to high-performance stretch films and shrink-wrapping improvements that reduced material use by 25 percent. The team also drove improvements that have generated a 60 percent reduction in angle-board material use.

In addition, Bush products are manufactured in an Environmentally Preferable Product (EPP) Downstream Licensed Facility. EPP Downstream is a program for manufacturers of finished or semi-finished products using composite panel materials (CPM) defined as particleboard, medium density fiberboard, and hardboard. To participate in the program, at least 50 percent of the CPM purchased for use at the facility must be certified to the CPA Environmentally Preferable Product Specification CPA 2-06.